Safety technology for terracotta products

Safety technology for terracotta products

Safety technology for terracotta products

It’s our pleasure to share a new and safety technology for terracotta products - Terracotta cavity injection film. 

During the firing process, the large-size terracotta panels and louvers are easily to have slight plane deformation, which causes the stress concentration of the hanging clamps during the installation of the facade.
Under the positive and negative wind pressure, it is easy to fracture and fall. Meanwhile, the soft body impact for Podium part is also a factor that influence the safety.
 Under this situation, Terracotta cavity injection film comes into being to solve this problem perfectly.
What is terracotta cavity injection film? It is a film that using professional machine to apply on the surface of terracotta cavity after terracotta products are finished.
It can greatly improve the anti-impact capability of terracotta panels to avoid risk of falling of broken terracotta panels. It can also be applied on the back surface of terracotta panels to realize the same function. 
So far the minimum size of cavity using such cavity injection film is 10*6mm.

https://www.tbpfacade.com/terracotta-louver_c14
mobile :+86-18250819205
email :Marketing@togen.com.cn

https://www.paneltekterracotta.com/products/stock-baggette-sections.html
mobile :+86-592-5723-008
email :inquiry@paneltekterracotta.com