Energy saving and environmental protection performance of clay terracotta panel

Energy saving and environmental protection performance of clay terracotta panel

At present, clay terracotta panels are mainly used in the field of curtain walls. Almost all curtain walls adopt dry hanging installation technology. terracotta panel curtain walls are no exception. terracotta panel curtain walls are made by dry hanging clay terracotta panel and metal components, especially stainless steel components with high corrosion resistance (through stainless steel expansion). The terracotta curtain wall is formed by the combination of the frame-framework on the decorative surface of the wall by bolts and the plate metal parts that are hung and fixed horizontally and vertically. The performance of ceramic board curtain wall and glass curtain wall, stone curtain wall and aluminum curtain wall widely used in the market.

(1)Heat preservation and energy saving
The ceramic plate is a hollow veneer plate that has been sintered at high temperature. The hollow structure not only reduces the weight of the ceramic plate, but also has the effects of heat preservation, energy saving, heat insulation, sound insulation and noise reduction. If combined with heat preservation wall materials, it can be larger Minimize the energy consumption of houses and buildings.
(2)Fire prevention
The dry-hanging ceramic plate after high temperature sintering has dense material, compact structure, high physical and mechanical strength, and good impact resistance, which meets the standard requirements of wind load resistance and seismic design of the curtain wall. In addition, it has good heat insulation and flame retardant properties, does not burn, and has excellent fire resistance.
(3)Good self-cleaning performance
The ceramic plate sintered at high temperature has a uniform and compact structure, its water absorption rate is low (about 6%), it is not easy to adsorb dirt, does not generate static electricity, and has good self-cleaning performance.
(4)Green
In addition to using natural raw materials for high-temperature sintering, the ceramic plate also uses wet plastic extrusion production technology and production equipment. The production process is dust-free and non-radioactive. It is a green and environmentally friendly material.